CATEGORY
BORING SERIES
TOOL HOLDERS
MILLING CUTTERS
TURNING TOOLS
CARBIDE END MILLS
CARBIDE INSERTS
ACCESSORIES
TECHNICAL DAT
Tailor-made Tools You Are Here : Tailor-made Tools
MAC Boring Cartridge - Assembling Size
轴向调节方法 / Adjusting on axial direction 径向调节方法 / Adjusting on radial direction
1.稍微松开刀座锁紧螺钉2。 1.顺时针方向旋转径向调节螺钉1，刀具直径逐渐变大。
2.顺时针旋转轴向调节螺钉3，刀座向前移动至需要的尺寸。 2.逆时针方向旋转径向调节螺钉1，刀具直径逐渐变小。
3.夹紧刀座锁紧螺钉2。 3.径向微调螺钉调节是每旋转一个刻度，刀具直径变化0.01mm
1.Loosening the 2# lock screw lightly. 1.Rotating the 1# radial adjusting screw in the clockwise direction, so that the diameter of tool will increase.
2.Rotating the 3# axial screw in the anticlockwise direction,so that the cartridge can be moved forward to the required size. 2.Rotating the 1# radial adjusting screw on the anticlockwise direction. so that the diameter of tool will reduce.
3.Tightening the 2# lock screw firmly. 3.The adjustment on diameter:0.01mm as per dial.
注 / Notice
■如果刀座需要向后调节，应当松开刀座锁紧螺钉，并把刀座移动到最后面，然后逐渐向前调节直到需要的尺寸。 ■Note:If the cartridge should be moved backward,please loosen cartridge screw,and then move the cartridge to the back,finally adjust the cartridge to forward little by little to meet the required size.



Previous Products

 MAC Boring Cartridge 		Next Products

 Inserts Holder SFC For Roughing



SELECTION PRODUCTS
BORING SERIES
TOOL HOLDERS
MILLING CUTTERS
TURNING TOOLS
CARBIDE END MILLS
CARBIDE INSERTS
ACCESSORIES
TECHNICAL DAT
 ABOUT US
Company Profile
Development
Partner
Certification
Company Culture
DEREK News
Contact us

Primary Company of a Group
Derek lndustry Group (Sweden) Co.,Ltd
Wholly-owned Subsidiary
Ningbo OuLe Machine Co.,Ltd (Producing)
Ningbo Derek Tools Co.,Ltd (Chinese Market)

E-mail: amy@derekmetal.com
  sales1@derekmetal.com
      

Copyright (c) 2017 Derek Inc. All rights reserved  ICP: 546576768664  

FEATURE

PRODUCTS

CATALOGUE

BACK

TOP